Table of Contents
Advertisement
Menu operation (continued)
IN STANDBY MODE
You can turn ON or OFF the audio output in standby
mode.
Change setting
OFF
Deactive
ON
Active
NOTE:
When STANDBY MODE is set to ECO, the audio output
cannot be activated in the standby mode, even if ON is
selected.
AUDIO IN SELECT
You can select the AUDIO IN 1 or AUDIO IN 2 terminal
to connect the audio output of the devices connected to
COMPUTER 1 IN or COMPUTER 2 IN.
Change setting
AUDIO IN SELECT
Select AUDIO IN 1 or
COMPUTER1 IN
AUDIO IN 2 terminal
Select AUDIO IN 1 or
COMPUTER2 IN
AUDIO IN 2 terminal
TEST PATTERN
You can use the 7 different test patterns to adjust the
focus of the image.
Change setting
Change pattern
Press [MENU] or [RETURN] to return to the
PROJECTOR SETUP menu, or press repeatedly to
escape the menu mode.
NOTE:
The initial screen is an all white pattern. Only when TEST
PATTERN is assigned to the [FUNCTION] button, the lattice
pattern will be displayed as the initial screen.
INITIALIZE ALL
You can reset all of the customized settings in MENU to
Change setting
the factory default.
If the [ENTER] is pressed in the INITIALIZE ALL
menu, "INITIALIZE ALL" will be displayed. Select
OK and press [ENTER], "NOW INITIALIZING... " is
displayed followed by "POWER OFF" display.
Select OK and turn the power off according to the
instruction. (All other buttons are deactivated.)
The LANGUAGE and INITIAL SETTING menu
screen will be displayed when the power is
connected. (
NOTE:
The usage time of the projector, lamp runtime and the
NETWORK settings will not be initialized.
When PASSWORD in SECURITY menu is activated,
ensure to enter the correct password when initializing.
After INITIALIZE ALL operation is completed, the password
is reset to the factory default setting and PASSWORD
setting is turned OFF.
To display the test pattern.
ENTER
page 12)
Change pattern
ENGLISH
41
Advertisement
Table of Contents
