Table of Contents
Advertisement
Menu operation (continued)
COLOR
You can adjust the color saturation of the projected
image. (For S-VIDEO/VIDEO/RGB (Moving image)/
YP
P
input signal only)
B
R
Lighter
TINT
You can adjust the skin tone of the projected image.
(For S-VIDEO/VIDEO/RGB (Moving image)/YP
input signal only)
More reddish
SHARPNESS
You can adjust the sharpness of the projected image.
Less sharp
NOTE:
The adjustable range depends on the input signal.
WHITE BALANCE
You can adjust the white balance in 3-color
temperature. (For RGB (Still image) input signal only)
-1
Advanced menu item
WHITE BALANCE
WHITE BALANCE
WHITE BALANCE
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Change setting
DEFAULT
Balanced white
HIGH
More bluish
LOW
More reddish
You can keep the projected image bright and vivid even
in well-lit rooms where the ambient light sources cannot
be controlled.
Change setting
P
B
R
NOTE:
Do not cover the Ambient Luminance Sensor(ALS) of the
projector, otherwise the AUTO mode may not function
More greenish
properly.
AUTO is not available when INSTALLATION in
PROJECTOR SETUP menu is set to REAR/DESK or
REAR/CEILING.
You can switch the automatic noise reduction system
More sharp
on/off. (For S-VIDEO/VIDEO input signal only)
Change setting
NOTE:
If NOISE REDUCTION is set active when the selected input
signal has less noise, the image may look different from the
+1
true image. If so, set to OFF.
Default
Switch the setting manually to match the video data.
RED
0
(For S-VIDEO/VIDEO input signal only)
GREEN
0
BLUE
0
Change setting
SECAM
NOTE:
Change setting
AUTO
When the projector is not working properly in AUTO mode,
change the setting according to each TV system type.
AUTO
signal from NTSC/NTSC 4.43/PAL/PAL60/PAL-M/PAL-N/
SECAM.
DAYLIGHT VIEW
AUTO
Automatic adjustment
ON
Active
OFF
Deactive
NOISE REDUCTION
OFF
No noise reduction
ON
Automatic noise reduction
TV-SYSTEM
AUTO
NTSC
PAL-N
mode is selected by default.
setting will automatically select the compatible
Change setting
Change setting
Change setting
NTSC4.43
PAL-M
PAL
ENGLISH
31
Advertisement
Table of Contents
