Table of Contents
Advertisement
Menu operation (continued)
1
Press [
] to select TEXT and then press
[ENTER].
2
Press [
] to select the desired line and then
press [ENTER].
TEXT1 and the text for the second line in TEXT2.
STARTUP LOGO
TEXT1
TEXT2
OK
CANCEL
RETURN
SELECT
ENTER
3
Press [
] to select the desired character
and then press [ENTER].
To delete all the input characters, move the cursor
to ALL DELETE and then press [ENTER].
To delete a character, press [DEFAULT] or move
the cursor to select the character then press
[DEFAULT].
TEXT CHANGE
SPACE
OK
CANCEL
RETURN
SELECT
ENTER
DELETE
4
Select OK and then press [ENTER] to set the
5
Select OK again and then press [ENTER].
Select CANCEL or press [MENU/RETURN] to
return to the previous menu without any setting.
ALLDELETE
AUTO SETUP
AUTO mode is selected by default.
If you do not need to perform automatic correction,
select "BUTTON".
Change setting
When the projector detects
COMPUTER signal, SHIFT, DOT
AUTO
CLOCK and CLOCK PHASE in the
POSITION menu is automatically set.
Only when [AUTO SETUP] is pressed,
SHIFT, DOT CLOCK and CLOCK
PHASE in POSITION menu will be
BUTTON
automatically set for COMPUTER
signals. (
SIGNAL SEARCH
You can turn off the auto signal detection.
Change setting
Detects the input signal from the
ON
terminals and projects the image
OFF
Deactive
NOTE:
SIGNAL SEARCH is not available during any input signal
projection.
BACK COLOR
You can choose BLUE or BLACK screen for the
projector when it is idle.
Change setting
Display blue screen
BLUE
BLACK
Display black screen
Change setting
page 25)
Change setting
Change setting
ENGLISH
37
Advertisement
Table of Contents
