Fixing Assembly
Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the fixing unit, perform
the following procedure. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the
fixing unit, you need paper larger than plain A4 or Letter size paper. Set the paper in the paper drawer or manual feed slot (
Paper in the Paper Drawer
Cleaning requires toner. Make sure that there is sufficient toner remaining beforehand.
It takes approximately 90 seconds to clean the fixing assembly.
Checking Toner Level
Loading Paper in the Manual Feed Slot
1
Press
.
2
Use
/
to select <Adjustment/Maintenance>, and press
3
Select <Clean Fixing Assembly>, and press
4
Load paper (A4/LTR or larger) in the manual feed slot, and press
After cleaning is completed and the message <Finished.> appears, press
Loading Paper in the Manual Feed Slot) before performing the following procedure.
.
.
.
to return to the copy mode screen.
0L40-088
Loading