Canon MF211 Manual page 119

1
Place the document(s).
2
Press or
To check the settings registered in the key, see
Scanning starts.
To cancel, press
You cannot scan while the MF Toolbox setup screen is displayed. Close the screen
before scanning.
3
If there are additional pages of documents to be scanned, place the next document on the platen glass, and
press .
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
4
Use / to select <Finish Scanning>, and press
The save destination folder is displayed on the computer.
About the save destination folder
By default, the scanned data is saved to the [Pictures] or [My Pictures] folder. A subfolder named with the scanning date is
created, and the data is saved to that folder.
To change the save destination, see
LINKS
Scanning from the Machine
Placing Documents
(for MF211, press ).
Checking the Registered Settings.
<Yes> .
Configuring Storing Settings.
.