When An Error Message Appears - Canon MF211 Manual

When an Error Message Appears

If you cannot connect network or the memory is full, or you encounter operation problems, a message appears on the display. Find out
more information about messages in the following list.
Amount in cart. cannot be displ. correctly.
Toner cartridge is not installed correctly, or there is possible trouble on the toner cartridge.
Reinstall the toner cartridge. If this message does not disappear after reinstalling several times, the toner cartridge
might be possibly broken. Contact the shop where you purchased the machine, or the Canon Customer Care Center.
How to Replace Toner Cartridges
You might not be using a Canon genuine cartridge.
We recommend Canon genuine toner cartridges as replacement toner cartridges.
Consumables
Cannot find the access point.
When automatic setting with WPS was attempted, a wireless router could not be detected within a specific
period of time.
Connect again paying attention to the time limit.
Setting Up Connection Using WPS Push Button Mode
Setting Up Connection Using WPS PIN Code Mode
An SSID or network key of a wireless router was entered manually, but the entry was incorrect.
Check the SSID and network key, and enter the correct ones again.
Checking the SSID and Network Key
Setting Up Connection by Specifying Detailed Settings
A wireless router could not be detected due to setting problems of the network to be connected.
Check whether the machine is properly installed and ready to connect to the network.
Installation/Settings Problems
If the problem persists, check the security settings of the wireless router.
Cleaning failed.
Paper jammed during cleaning.
Remove the jammed paper, set paper correctly, and perform cleaning again.
Clearing Jams
Fixing Assembly
The amount of toner required for cleaning the fixing unit is insufficient.
Cleaning requires toner. Replace the toner cartridge, and perform the cleaning again.
Replacing Toner Cartridges
Could not connect. Check the PSK settings.
0L40-07J