Canon VB-C60 Start Manual page 64

Step 4 Install the Camera
2. Determine the installation position of the camera.
Apply the bundled template onto the dome to determine the hole positions for backside
ceiling bracket and in-ceiling bracket, and mark the positions using a pencil, etc.
Template bundled with the dome
Camera direction
3. Open in the ceiling the holes (3 locations) for installing the backside ceiling bracket, as well as
a hole for in-ceiling bracket.
Note
After the holes have been opened, be careful not to let shavings, etc., enter the dome when
the indoor dome housing is installed.
4. Install the backside ceiling bracket in the ceiling.
Access from inside the ceiling and insert the projections of the backside ceiling bracket into
the holes opened in step 3.
Tip
It is recommended that the backside ceiling bracket be temporarily secured with double-
sided adhesive tape, etc., so that the backside ceiling bracket will not separate when the
dome is secured later on.
2-22
Backside ceiling bracket
ø 7.0mm
Height
10.0mm