Canon VB-C60 Start Manual page 60

Step 4 Install the Camera
2. Use the bundled template to determine the installation position of the camera.
Determine the positions of mounting screw holes and wiring hole by considering the
orientation of the camera, and mark the positions using a pencil, etc.
Camera direction
3. Drill the mounting screw holes (2 locations) and wiring hole in the ceiling using a drill, etc.
Note
If an AC adapter (optional) is used, the wiring hole should be large enough for the ferrite
cores on the cable to pass.
4. Secure the safety wire.
Securely attach the safety wire to an anchor or structure.
After securing the ceiling end, secure the camera end of the safety wire using a screw
supplied with the camera.
1
2
Note
If the ceiling is made of concrete or otherwise the wiring hole cannot be opened, secure the
wiring to an appropriate position.
2-18
Distance between screws: 157mm (6.18inch)
Screw holes for M4.0 screws