Canon VB-C60 Start Manual page 49

Note
For details on PoE HUB and Midspan, check with your Canon sales representative.
For the operating methods and other details of a PoE HUB or Midspan, see the operation
manual or other documentation that comes with the applicable device.
For the LAN cable connecting the camera and a PoE HUB, use a cable of Category 5 or
higher of a length not more than 100m.
If the camera is connected to a switching HUB, changing the connection while the camera
is operating may disable communication due to the learning function of the HUB. Do not
change the connection while the camera is operating.
An AC adapter (optional) can also be connected to the camera while the power is supplied
from a PoE HUB. In this case, the PoE power is given priority while the power is supplied from
the PoE HUB and the power from the AC adapter (optional) is not used. Once the PoE power
is cut off, the power is automatically supplied from the AC adapter (optional).
VB-C60
LAN cable
LAN cable
VB-C60
* Midspan (LAN-cable power supply) is a device that supplies power to the camera via a LAN cable,
just like a PoE HUB.
This camera has no power switch.
If the power is supplied to this camera by the PoE via a LAN cable, disconnect and connect the
LAN cable from/to the HUB receiving the power, to turn the power [ON]/[OFF].
If an AC adapter (optional) or external power supply is used, disconnect and connect the power
plug of the AC adapter (optional) or external power supply, to turn the power [ON]/[OFF].
Tip
When the power is turned on, the camera head position is initialized automatically.
Max. 100m
Midspan
(LAN cable power supply device)
Step 2 Connect the Camera to the Network
PoE HUB
HUB
2-7