Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual

Table of Contents

Advertisement

[REC] Mode:
Taking Pictures that Match the Scene Being
Recorded
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
Press 3/4/2/1 to select the Scene Mode.
You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
The menu screen is switched to the recording screen in the
selected Scene Mode.
∫ About the information
If you press [DISPLAY] when selecting a Scene Mode in step
explanations about each Scene Mode are displayed. (If you press
[DISPLAY] again, the screen returns to the Scene Mode menu.)
Note
To change the Scene Mode, press [MENU/SET] and then press 1, and return to step
(when [MENU RESUME]
The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed.
When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
[FILM MODE]/[SENSITIVITY]/[ISO LIMIT SET]/[ISO INCREMENTS]/[METERING MODE]/
[I.EXPOSURE]/[MULTI EXPO.]/[MIN. SHTR SPEED]/[I.RESOLUTION]/[i.ZOOM]/[FLASH
SYNCHRO]
Advanced (Recording pictures)
(Scene Mode)
].
(P39)
is [OFF]).
2
,
- 92 -
2
above

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents