Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual page 116

Table of Contents

Advertisement

∫ Shutter speed for each flash setting
Flash setting
ˆ
Š
¢1 It may vary depending on the [MIN. SHTR SPEED] setting.
¢2 When [MIN. SHTR SPEED] is set to [AUTO].
Refer to
P83
for details about the Aperture-Priority AE, Shutter-Priority AE, and Manual
Exposure.
¢2: The shutter speed becomes a maximum of 1 second in the following cases.
When the Optical Image Stabilizer is set to [OFF].
When the camera has determined that there is very little jitter when the Optical Image
Stabilizer is set to [MODE1], [MODE2] or [AUTO].
In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
In Scene Mode, shutter speed will be different from the above table.
Note
Do not bring the flash too close to objects or close the flash while it is activated. The
objects may be discolored by its heat or lighting.
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
Red-eye reduction etc. It causes a malfunction.
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become too bright or too dark.
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully.
The White Balance may not be properly adjusted if the flash level is insufficient for the subject.
The flash effect may not be sufficient when using [FLASH BURST]
when shutter speed is fast.
It may take time to charge the flash if you are taking pictures in quick succession. Take a
picture after the access indication disappears.
The Red-Eye Reduction effect differs between people. Also, if the subject is far away from the
camera or was not looking at the first flash, the effect may not be evident.
When the [CONVERSION]
When the external flash is installed, it will be prioritized. See
external flash.
Advanced (Recording pictures)
Shutter speed (Sec.)
¢1
1/60
to 1/4000
(P150)
is set to [
Flash setting
Œ
(P143)
(P143)
], the flash is fixed to [Œ].
P199
- 72 -
Shutter speed (Sec.)
¢1
1
to 1/4000
¢2
1 or 1/4 to 1/4000
(P101)
in Scene Mode or
for more information on the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents