Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual page 255

Table of Contents

Advertisement

Before cleaning the camera, remove the battery or the DC coupler (optional), or
disconnect the power plug from the outlet. Then wipe the camera with a dry soft
cloth.
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,
and then with a dry cloth.
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
camera, since it may deteriorate the external case or the coating may peel off.
When using a chemical cloth, be sure to follow the accompanying instructions.
About the LCD monitor/External Live Viewfinder (DMW-LVF1; optional)
Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD
monitor and it may malfunction.
If the camera is cold when you turn it on, the picture on the LCD monitor/External Live
Viewfinder (optional) will be slightly darker than usual at first. However, the picture will return to
normal brightness when the internal temperature of the camera increases.
Extremely high precision technology is employed to produce the LCD monitor/External
Live Viewfinder (optional) screen. However, there may be some dark or bright spots
(red, blue or green) on the screen. This is not a malfunction. The LCD monitor/External
Live Viewfinder (optional) screen has more than 99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit. The spots will not be recorded on pictures on
the built-in memory or a card.
Do not press against the lens with excessive force.
Do not leave the camera with the lens facing the sun, as rays of light from the sun may cause it
to malfunction. Also, be careful when placing the camera outside or near a window.
Others
Cleaning
About the Lens
- 211 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents