Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual page 264

Taking pictures using [AUTO BRACKET]/[ASPECT BRACKET]/White Balance
Bracket is not possible.
•
Is the number of recordable pictures 2 or less?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Increase the setting for [NOISE REDUCTION] in [FILM MODE] or lower the setting for each
of the items other than [NOISE REDUCTION].
> Take pictures in bright places.
•
Has [HIGH SENS.] or [HI-SPEED BURST] in the Scene Mode been set? If so, the resolution of
the recorded picture decreases slightly because of high sensitivity processing, but this is not a
malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
If recording under fluorescent light, the brightness or the hue may change slightly when the
shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not
a malfunction.
When recording pictures or half-pressing the shutter button, reddish stripes may
appear on the LCD monitor. Alternatively, part or all of the LCD monitor may turn
a reddish color.
•
This is a characteristic of CCDs, and it appears when the subject has
a bright part. Some unevenness may occur in the surrounding areas,
but this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•
It is recommended that you take pictures while taking care not to
expose the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
•
Use a card with SD Speed Class
[AVCHD Lite].
Also, use a card with SD Speed Class with "Class 6" or higher when recording motion pictures
in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
•
Depending on the type of the card, recording may stop in the middle.
> If motion picture recording stops during use of a card of at least "Class 4" or if you use a
card that has been formatted on a PC or other equipment, the data-writing speed is lower.
In such cases, we recommend that you make a backup of the data and then format
the card in this unit.
Others
(P130)
(P125)
¢
with "Class 4" or higher when recording motion pictures in
- 220 -
(P40)