Limited Warranty (Only For U.s.a. And Puerto Rico); Stabilizer Demo - Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual

[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
~ [LANGUAGE]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[DEMO MODE]
DEMO
•
The Stabilizer function is switched between [ON] and [OFF] every time [MENU/SET] is pressed
during the [STABILIZER DEMO.].
•
[STABILIZER DEMO.] is an approximation.
•
Press [DISPLAY] to close [STABILIZER DEMO.].
•
[AUTO DEMO] has no TV output capability even when it is in Playback Mode.
•
Press [MENU/SET] to close [AUTO DEMO].
Preparation
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected.

([STABILIZER DEMO.])

The camera's features are displayed as slide shows. ([AUTO
DEMO])
[STABILIZER DEMO.]
A Amount of jitter
B Amount of jitter after correction
[AUTO DEMO]:
[OFF]
[ON]
- 40 -
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
A B