Panasonic Lumix DMC-LX5 Basic Operating Instructions Manual page 270

An unreadable language was selected by mistake.
> Press [MENU/SET], select the [SETUP] menu icon [
the desired language.
Part of the picture is flashing in black and white.
•
This is a highlight function showing the white saturated area.
•
Is the [HIGHLIGHT] set to [ON]?
A red lamp sometimes turns on when the shutter button is pressed halfway.
•
In dark places, the AF Assist Lamp
The AF Assist Lamp does not turn on.
•
Is [AF ASSIST LAMP] on the [REC] Mode menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The lens clicks.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When
taking pictures, it will not be possible to record the correct date without setting the clock.
(P25)
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colors which are not actually present.
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
Zooming stops instantaneously.
•
When using the Extended Optical Zoom or the Intelligent Zoom, the zooming action will stop
temporarily. This is not a malfunction.
Others
Others
(P40)
(P147) lights red to make it easier to focus on a subject.
- 226 -
] and then select the [~] icon to set
(P34)
(P147)