Table of Contents
Advertisement
HELM AND INSTRUMENTATION
Your Cobalt boat helm will monitor and provide
operation of the boat's functions. The gauges are
illuminated for night operation.
On occasion, a small fluctuation in a gauge reading
is not unusual. If an instrument reading is outside
the normal or recommended ranges, determine the
cause or see your authorized Cobalt dealer.
Refer to the engine operator's manual for normal
recommended ranges.
A
WARNING
Avoid the risk of injury, death or
equipment damage. If the safety of you
or others depends on running the
engine during an abnormal condition,
make the right decision on saving
equipment or lives. Do not jeopardize
the safety of you or others to protect
your boat.
24SD Owner's Manual
O
PERATING
7
1
6
4 5
2 3
13
12
I
NFORMATION
8
9
10
11
19
15
14
1. GLASS COCKPIT DASH UNIT
Smart Mode screens are preprogrammed by
Cobalt. To access screens:
1. Press HOME, if not already there.
2. Press Smart Mode.
3. Select desired mode from Smart Mode screen.
NOTICE: To reset to default
settings, contact your Cobalt
dealer.
A/V, Gauges/Control settings are auto-populated,
depending on options; however, they can be
customized.
To adjust screen brightness, press and release
power button quickly.
If your boat is equipped with EVC, when the engine
is turned off, turn the key back to the ON position
within 2 seconds. The screens will stay on. From
Power Off, it takes approximately 60 seconds for
displays to boot up.
3
21
-
17 16
18
COB_0464_A
Advertisement
Table of Contents
