Premium Bimini Top - Optional; Premium Bimini Top With Easy Fold - Optional - Cobalt Digital Inc 24 SD Owner's Manual

Hide thumbs Also See for 24 SD:
Table of Contents

Advertisement

A
WARNING
Arches or towers are designed to tow a
wakeboarder. Do not tow other boats,
tubes, parasails, etc. Do not climb, jump
or dive off the tower. Do not sit behind
the tower where you could come in
contact with the rope. Do not allow
loose ropes to hang from the tower. Do
not trailer the boat with boards or skis in
the racks. Before and during each use
make sure all bolts and fasteners are
tight. Make sure you have sufficient
clearance above the tower when it is up.
Watch for bridges, power lines, tree
limbs and other low hanging obstacles.
Failure to follow these instructions can
lead to serious injury or death.
PREMIUM BIMINI TOP -
OPTIONAL
1. Remove the stainless adjustable arms from the
storage area.
2. Unfold the top and install the stainless
adjustable arms (tensioners) into the
quick-disconnect fittings on the deck, forward of
the windshield. Secure the forward arms to the
forward cross members with the pins.
3. Tighten the bimini by twisting the tensioners.
4. When the top is up, make sure the light wire is
routed correctly and the navigation light is
properly secured.
1
2
1 – Navigation Light
2 – Light Wire
5. To assist in laying the bimini down for storage,
there are 4 knobs and lanyards in the glove box
that can be installed instead of the socket-head
bolts and slotted screws, if desired.
24SD Owner's Manual
O
PERATING
Do not trailer with the bimini top up. Store and
trailer the bimini top in the stowed position, in its
canvas boot.
PREMIUM BIMINI TOP WITH
EASY FOLD - OPTIONAL
1. Remove the stainless adjustable arms from the
2. Unfold the top and install the stainless
3. Tighten the bimini by twisting the tensioners.
4. When the top is up, make sure the light wire is
5. To assist in laying the bimini down for storage,
6. To fold down the bimini top, release the port
COB_0455_A
3
39
-
I
NFORMATION
storage area.
adjustable arms (tensioners) into the
quick-disconnect fittings on the deck, forward of
the windshield. Secure the forward arms to the
forward cross members with the pins.
routed correctly and the navigation light is
properly secured.
1
2
1 – Navigation Light
2 – Light Wire
there are 4 knobs and lanyards in the glove box
that can be installed instead of the socket-head
bolts and slotted screws, if desired.
Do not trailer with the bimini top up. Store and
trailer the bimini top in the stowed position, in its
canvas boot.
side lever.
COB_0455_A

Advertisement

Table of Contents
loading

Table of Contents