Helm And Instrumentation - Cobalt Digital Inc 255 Owner's Manual

HELM AND INSTRUMENTATION

2
1
9
10
11
12
13
Your Cobalt boat helm will monitor and provide
operation of the boat's functions. The gauges are
illuminated for night operation. When the switches
are activated, the LEDs will illuminate if the switch
is ON.
On occasion, a small fluctuation in a gauge reading
is not unusual. If an instrument reading is outside
the normal or recommended ranges, determine the
cause or see your authorized Cobalt dealer.
Refer to the engine operator's manual for normal
recommended ranges.
A
WARNING
Avoid the risk of injury, death or
equipment damage. If the safety of you
or others depends on running the
engine during an abnormal condition,
make the right decision on saving
equipment or lives. Do not jeopardize
the safety of you or others to protect
your boat.
4
5
3
15
17
15 16
14
Cuddy Cabin
6
7
8
15
14
19
22
21
18
1. TEMP (Engine Water Temperature Gauge) -
Indicates the water/coolant temperature inside the
engine. Refer to the engine operator's manual for
normal operating temperature. After starting the
engine, check your temperature gauge for
abnormally high readings. If the reading is outside
the manufacturer's operating range, immediately
turn off the engine. An abnormally high
temperature is the result of cooling water system
blockage. See your authorized Cobalt dealer when
experiencing a high engine temperature reading.
2. OIL (Engine Oil Pressure Gauge) - Measures
the pressure of the engine's lubricating oil, in
pounds per square inch (PSI). Refer to the engine
operator's manual for correct specifications.
Many serious engine problems are reflected on oil
pressure gauge readings. If the pressure is lower
than the manufacturer's specification, immediately
shut off the engine. Have your authorized Cobalt
dealer correct the problem before operating the
engine.
3-20
Section 3
20
26
27
25
24
23
COB_0002_A
255 Owner's Manual