Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Audionet AMP II
Summary of Contents for Audionet AMP II
- Page 1 Audionet AMP II Mono - Amplifier Owner's Manual...
- Page 2 Owner's manual The Audionet-Team would like to congratulate you to purchasing the Audionet AMP II! Your Audionet AMP II is designed for absolutely natural music reproduction at highest user comfort embedding total sys- tem security. Please read this manual before first use to make sure that you are able to use all provided functions of your new amplifier.
-
Page 3: Setting Up Your System
Placing Your Audionet AMP II have the perfect dimensions to be placed near your speakers. But put side by side both AMP II are 43 cm in width (standard width). Do not cover the top to prevent the amplifiers from overheating! -
Page 4: Inputs And Outputs
Inputs At first please connect your pre amplifier to the inputs of your AMP II. For audio input you can use balanced (XLR) as well as unbalanced (cinch) cables. For connections longer than 2 m we recommend balanced cables. - Page 5 For switching on and off please press the “power” button at the front of the AMP II. The main switch at the back is only to be used if you are ab- sent for a longer time and must only be operated while the AMP II is in...
- Page 6 "Warm Up" Countdown While you are absent your AMP II can switch on automatically and will be pre-heated for use when you get back. To activate this feature please use a long key press on the "power" button at the front. The display changes to show the countdown timer.
-
Page 7: Protection System
Protection system Your Audionet AMP II and your loudspeakers are protected by a com- plex protection circuitry. Any error will be printed in clear at the display: § Overload: Shorted loudspeaker cables or defective loudspeaker (your AMP II is capable of driving even 1W loads) §... - Page 8 Operating To change settings use short or long key presses on the "power" button at the front of the AMP II. Switch on your AMP II and hold the button pressed for at least 2 seconds to enter the menu.
-
Page 9: Set Display
Operating SET DIM 100% Select display brightness (5 steps) SET DISPLAY STANDARD Standard display TEMPERATURE Temperature display PEAK-LEVEL Peak level meter SET INPUT CINCH Select cinch input BALANCED (XLR) Select balanced (XLR) input SET AUTO ON NEVER ON Never power on automatically FAST ON High sensitivity MEDIUM ON... -
Page 10: Technical Information
Class A. Peak level meter In order to determine the impulse peak level the AMP II detects a voltage maximum and measures the current flowing at that point of time. By that impedance critical loudspeakers are processed automatically and a ac- cording to that a higher peak level is displayed. -
Page 11: Security Advice
Security advice ¨ Avoid packaging material, especially plastic bags, to come into children’s hands. ¨ Store and operate the unit in a dry room at a reasonable room temperature ¨ Avoid moisture or any liquid to get into the unit ¨... -
Page 12: Technical Data
350 Watt in 4W 550 Watt in 2W 750 Watt in 1W, all true RMS at 1% THD Bridged operations 1400 Watt in 4W, two AMP II per channel Frequency response 0 - 300.000Hz (-3dB) Damping factor > 1.800 at 10kHz, (8W) >...
Need help?
Do you have a question about the AMP II and is the answer not in the manual?
Questions and answers