Page 1
Audionet PRE I G2 Stereo – Pre - Amplifier Owner's Manual...
Page 2
How to operate the Audionet PRE 1 G2 Your Audionet PRE 1 G2 is a high performance audio pre-amplifier. This system is designed for absolute natural music reproduction and for highest user comfort. The following will give you all information about how to operate your PRE 1 G2.
Audio sources The Audionet PRE 1 G2 is a very sensitive system. Please ensure that all used connector cables are in absolutely best condition. For connecting or removing audio sources, PRE 1 G2 has to be switched off (stand by-state) or must be muted.
Page 4
In combination with the Audionet AMP I/AMP II and/or DAC the PRE 1 G2 can switch on and off the whole system. Please connect the Audionet link (8) on the rear with a Toslink optical fibre cable to the Audionet link of AMP I and/or DAC.
Switching on and off the mains Your PRE 1 G2 is designed as a stand-by unit. To bring your PRE 1 G2 into the stand-by state, please press the mains power switch (3) on the rear. The PRE 1 G2 will come up in the stand-by state displaying “ Audio- net”...
Operating the system All functions of your PRE 1 G2 are completely microprocessor con- trolled. This guarantees highest precision, exclusive functions, easy opera- tion and protection against operational faults. Switching on and off in the For switching on your PRE 1 G2, please press the power button at the stand by state front panel.
Page 7
Monitor loop To activate the monitor input please push the monitor/set button for a short time. The originally selected input remains active for recording. This input can be chanced during the monitor loop is activated, of course. To come back to the standard input simply press the described button a second time.
Page 8
The programming ignition sequence is entered pressing the monitor/set button longer than one second. For programming, please do the following: Balance 1. Push the monitor/set button once for at least one second. 2. Now you are enabled to adjust the stereo balance of your system. Turning the volume knob clockwise decreases the level of the left channel, turning counter clockwise will decrease the right channel’s level.
Page 9
2. Now you can choose the text to be displayed when your PRE 1 G2 is in stand-by mode by turning the volume knob. The possible texts are: "AUDIONET" or "¤¤". Push the set button once again to finish programming.
Using the remote control All functions of the PRE 1 G2 can be operated by the Audionet remote control in the same way as described for the front panel. For setting the volume level, please push + or - of the remote control vol- ume button pair.
Two high performance outputs and a powerful monitor loop for recording and controlling purposes are also available. Optional features are a IR remote control, phono module, 24bit D/A con- verter and external power supply (Audionet EPS).
* Do not cover, e.g. with a blanket * Do not open the case. Unauthorized opening will cause loss of guarantee. * Use a dry cloth for cleaning Engineered and produced by: Idektron GmbH & Co. KG, Herner Str. 299, Gebä ude 6, 44809 Bochum www.audionet.de contact@audionet.de...
Need help?
Do you have a question about the PRE I G2 and is the answer not in the manual?
Questions and answers