Intermec EasyCoder F4 Installation & Operation Manual page 81

Appendix 4 Supported IPL-3 Commands
Supported IPL-3 Commands, cont.
IPL Command Syntax
Test and Service Mode, Exit ................................................................R
Top of Form, Set ...................................................................................<SI>F
Transmissive Sensor Value, Transmit .................................................G
User-Defi ned Characters (UDC) and Graphics, Print .......................g
User-Defi ned Character, Clear or Create ............................................G
User-Defi ned Character Field, Create or Edit ....................................U
User-Defi ned Characters, Transmit .....................................................<ESC>u
User-Defi ned Font Character, Create ..................................................t
User-Defi ned Fonts, Print ....................................................................t
Warm Boot ............................................................................................<BS>
Width of Line, Box, Bar, or Character, Defi ne ...................................w
80 Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 1