Engine Stop Key; Pre-Drive Inspection - Joyner JNSZ650UV4S Owner's Manual

Each time prior to starting the engine, check the throttle assembly to ensure that when
pedal is pushed all the way forward the assembly is working smoothly and returns to idle
when released. Do not operate if pedal or engine throttle linkage fail to return to idle. If
unable to correct the problem through lubrication, adjustment or replacement of worn
parts, contact your dealer for assistance.
Before you start the engine, check that the parking brake is engaged, and the gear shift
lever is in neutral. Trying to start the engine in gear may damage the starter motor, clutch
or gearbox.
Release the key at once if the engine starts. Holding the key in start position when the
engine is running will cause damage to the starter motor.
If the engine does not start after 5 seconds, a second attempt to start the engine can be
allowed. Improper operation will damage the engine.

Engine stop key

Before driving this vehicle, test the Engine Stop key to assure that it is operating
properly. With the engine running, turn the key counterclockwise to the "off" position
for the engine to shut down.

Pre-Drive Inspection

41