Table of Contents
Advertisement
Front Wheel Alignment
a. Put the vehicle on level ground.
b. The "toe-in" of the front wheels should be 1.18 inches. To check for alignment,
measure distance A and B between the centerline (CL) of the wheels. The proper
toe-in dimension A should be 1.18 inches greater than dimension B.
d. To adjust the alignments, loose the lock nuts on both sides of Front Tie Rods. To
make Dimension B smaller, turn the rod to the left. Turn the rod to the right to
make Dimension B larger. After adjusted to desired length, tighten the lock nut
against the rod end. Recheck the dimensions for proper alignment.
65
Advertisement
Table of Contents
