Glove Compartment - Joyner JNSZ650UV4S Owner's Manual

the seats can be Lifted just like the cargo bed .
It is very easy to install or uninstall the seats, see
the table of the content"seat and safety belt" 。
Safety belts
This vehicle is equipped with three-point
seat belts for both the operator and passenger.
Always wear the seat belt while riding in the vehicle.
To wear the seat belt properly, do the following.
1. Hold the latch plate as you pull the bell across
your lap and chest. Make sure the belt is not twisted
and is not caught on any portion of the vehicle,
your clothing, or any equipment you are carrying.
2. Push the latch plate into the buckle until it
clicks. Pull up on the latch plate to make sure it is
secure.
3. Put the lap portion of the belt low on your hips.
Push down on the buckle end of the belt as you pull up on the shoulder part so the belt
is snug across your hips.
4. Position the shoulder belt over your shoulder and across your chest. The shoulder
belt should fit against your chest. If it is loose, pull the belt out all the way and then let
it retract.
5. To release the buckle, firmly press the release button.

Glove compartment

Push down and turn to open the glove box.
 To protect from damage, do not put metal products, like tools or sharply edged
products directly in the glove compartment. If they must be stored, wrap them in
appropriate cushion material.
26