12
SERVICE WORK ON THE CHASSIS
12.40
Checking the frame
12.41
Checking the swingarm
12.42
Checking throttle cable routing
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
401340-01
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401341-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bearing.
»
If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
K00110-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
Info
Always replace a frame that has been damaged due to a mechanical
impact. Repair of the frame is not authorized by KTM.
Info
Always change a damaged swingarm. Repair of the swingarm is not
authorized by KTM.
p. 64)
(
p. 69)
(
p. 70)
p. 64)
76