Handlebar Position - KTM 450 EXC Owner's Manual

11 TUNING THE CHASSIS
11.15

Handlebar position

(All EXC models)
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar holders are placed at a distance of
Hole distance
The handlebar holders can be mounted in four different positions.
M00987-10
(XC‑W)
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar holders are placed at a distance of
Hole distance
The handlebar holders can be mounted in four different positions.
M00993-10
Info
Turn clockwise to increase the spring preload; turn counterclockwise to
reduce the spring preload.
Adjusting the spring preload has no influence on the absorption setting
of the rebound damping.
Basically, however, you should set the rebound damping higher with a
higher spring preload.
15 mm (0.59 in)

3.5 mm (0.138 in)

15 mm (0.59 in)

3.5 mm (0.138 in)

47

to each other.

from the center.

to each other.

from the center.