Table of Contents
Advertisement
OPERATING ELEMENTS
Combination instrument - setting/resetting TRIP 2 display
Info
The tripmaster TRIP 2 operates constantly and counts up to 999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.
Switch on the ignition by turning the ignition key to the position
Press the MODE button several times until the TRIP 1 display mode is active.
Keep the SET button pressed.
The TRIP 1 display is at 0.0.
700121-01
Switch on the ignition by turning the ignition key to the position
Press the MODE button several times until the TRIP 2 display mode is active.
Keep the SET button pressed.
The TRIP 2 display is at 0.0.
700122-01
36
.
.
Advertisement
Table of Contents
