Modem - Toshiba PORTEGE M300 Maintenance Manual

4.21 Modem

4.21 Modem

Removing the modem
To remove the modem, follow the steps below and refer to figures 4-34 and 4-35.
1. Remove the following screws securing the MDC.
M2.0x4.0Z
2. Disconnect the MDC from the connector CN3000 on the system board by lifting it
straight up.
3. Disconnect the modem cable from the connector of the MDC.
4. Disconnect the modem cable from the connector CN3001 on the system board.
5. Turning up the insulators 1 covering the modem cable, pull out the modem cable.
6. Opening the insulator 2 covering the core of modem cable, pull out the modem cable
from the slit of insulator and remove it from the system board.
4-48
BIND screw
CN3000
Figure 4-34 Removing the MDC
4 Replacement Procedures
×2
M2.0x4.0Z BIND
MDC
Modem cable
PORTEGE M300 Maintenance Manual (960-504)