3 Tests and Diagnostics
Subtest 06
Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
The figure below shows the name and position of each side.
Left side
(left)
PORTEGE M300 Maintenance Manual (960-504)
Top
(heaven surface)
Back
Figure 3-1 Name and positions of each side
3.20 Only One Test
Vertical plane
Right side
(right)
Front
3-45