Toshiba PORTEGE M300 Maintenance Manual page 254

4.9 Optical drive
3. Remove the following screws securing the rear bracket and remove it from an
optical drive assembly.
Unique screw Stepping screw
4. Remove the following screw securing the side bracket and remove it from an optical
drive assembly.
M2.0×3.0S
M2.0x3.0S
S-THIN FLAT BIND
4-26
S-THIN FLAT BIND screw
Side bracket
Figure 4-16 Removing the brackets
4 Replacement Procedures
×2
×1
Rear bracket
Fitting this dent
to the side bracket
PORTEGE M300 Maintenance Manual (960-504)
Stepping screw