Toshiba PORTEGE M300 Maintenance Manual page 265

4 Replacement Procedures
Touch pad
Installing the Touch Pad
To install the touch pad, follow the steps below and refer to figures 4-23 and 4-24.
1. Arranging the touch pad cable, stick the touch pad in place and secure it with
following screws.
M2.0x3.0S
2. Install the pad cover while locking latches.
3. Stick the cover sheet along the guide of cover assembly.
CAUTION: Do not reuse the cover sheet. Be sure to use a new cover sheet after peeling
off the cover sheet from the cover assembly.
PORTEGE M300 Maintenance Manual (960-504)
Figure 4-24 Removing the touch pad
S-THIN FLAT BIND screw
4.12 Touch Pad
Pad cover
M2.0x3.0S
S-THIN FLAT BIND
×2
4-37