Samsung VP-DX10 User Manual page 112

Hide thumbs Also See for VP-DX10:
Table of Contents

Advertisement

troubleshooting
TROUBLESHOOTING
Before contacting a Samsung authorized service center, perform the
following simple checks. They may save you the time and expense of an
unnecessary call.
Warning indicators and messages
Power source
Message
Icon
Informs that...
The battery pack is
Low Battery
almost discharged.
Storage media
Message
Icon
Informs that...
There is not enough
Memory Full
memory to record.
There is no disc in DVD
Insert Disc
camcorder.
There is not enough disc
Disc Full
space.
Finalised
The disc is finalised.
Disc
The disc is not
recognized in the DVD
Not
camcorder.
Supported
The disc is finalised
Disc
in the camcorders
manufactured by other
companies
File system does not
Disc Error
match to the disc. Disc
is formatted in the PC.
The power is suddenly
turned off while
Write Error
recording, the file writing
is not properly done.
Not
The memory card is
Supported
not supported in this
Card
camcorder.
The memory card or the
Card Error
controller are corrupted.
106_ English
Action
Replace with a charged battery or connect the
AC power adaptor. (If the AC power adaptor
is connected when "Low Battery" is displayed,
the power is turned off and the charging starts.)
Action
Delete unnecessary files on the built-in memory.
Use another storage media. pages 31
Insert a disc.
Change to a new disc.
Erase recorded image.
To record on a DVD-RW/+RW disc, unfinalise it.
The supported discs are DVD-R, DVD+R
DL, DVD-RW and DVD+RW.
Use a new disc.
Reformat the disc for –RW/+RW.
Scratch should not be on the surface of the
disc.
To recover previous data in your disc or
memory card, turn the power off and on.
After recovering data, the system will be
switched to STBY mode.
If it fails to recover data, "Disc Error" or
"Card Error" appear.
Change the memory card that we
recommended. pages 32-33
The memory card could be damaged. Try
with another memory card.
故障排除
故障排除
在聯絡 Samsung 授權的維修中心之前,請執行下列簡單檢查。這將可節
省不必要的撥電時間和費用。
警告指示器和訊息
電源
訊息
圖示
表示...
電池組幾乎完全
Low Battery
放電。
儲存媒體
訊息
圖示
表示...
沒有可供錄製的足夠
Memory Full
記憶體。
DVD 攝錄放影機中沒
Insert Disc
有光碟。
Disc Full
沒有足夠的光碟空間。
Finalised Disc
光碟已終結。
光碟無法在 DVD 攝錄
Not Supported
放影機中識別。
Disc
在其他公司製造的攝
錄放影機中終結光碟
檔案系統與光碟不符。
Disc Error
在電腦中對光碟進行
格式化。
電源在錄製時突然關
Write Error
閉,就無法正常完成
檔案寫入。
Not Supported
記憶卡在此攝錄放影
Card
機中不受支援。
Card Error
記憶卡或控制器損毀。 記憶卡可能會被損毀。嘗試使用其他記憶卡。
措施
更換充電電池或連接交流電源適配器。
(如果在顯示「Low Battery」時連接交流電源
適配器,會關閉電源,同時會開始充電。 )
措施
刪除內置記憶體上不必要的檔案。
使用另一種儲存媒體。  第 31 頁
插入光碟。
更換新光碟。
刪除已錄製的影像。
要在 DVD-RW/+RW 光碟上錄製,可對其取消
終結。
支援的光碟有:DVD-R、DVD+R DL、
DVD-RW 和 DVD+RW。
使用新光碟。
重新格式化 RW/+RW 光碟。
不可刮擦光碟表面。
要恢復光碟或記憶卡中先前的資料,請關閉
電源,然後重新開啟電源。
在恢復資料後,系統將被切換到 STBY 模式。
如果恢複資料失敗, "Disc Error" 或
"Card Error" 就會出現。
變更我們建議的記憶卡。  第 32-33 頁
臺灣 _ 106

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-dx10h

Table of Contents