Using The Display - Samsung VP-DX10 User Manual

preparation

USING THE DISPLAY (

)/iCHECK BUTTON
Switching the information display mode
You can switch between the on-screen information
display modes:
Press the Display ( ) / iCHECK button.
Each press of the button toggles the OSD
(On Screen Display) function on and off.
• Full display mode: All information will appear.
Minimum display mode: Only operating status
•
indicator will appear.
If the DVD camcorder has warning information, a
warning message will appear.
Checking the remaining battery and
recording capacity
• Slide the POWER switch downward to turn off
the power, and then press the Display (
iCHECK button.
• After a while, the battery time and approximate
recordable time according to the storage and
quality appear for about 10 seconds. If a storage media is not
inserted, its icon is dimmed.
• The Display ( ) / iCHECK button will not work in the menu and quick
menu mode.
• More than 1 minute may be required to display the disc information
depending on the disc condition.
26_ English
準備工作
使用顯示 (
Battery
0%
50%
60 Min
Memory (Fine)
95 Min 30 Min
95 Min
) /
Remaining battery (approx.) Remaining battery (approx.) Remaining battery (approx.)
Recording capacity (approx.)
)/ i CHECK 按鈕
切換資訊顯示模式
您可以在螢幕上資訊顯示模式之間切換：
打開電源後按顯示 (
每按一次該按鈕就會開啟或關閉 OSD ( 螢幕上顯示 )
功能。
•
全部顯示模式：將顯示所有資訊。
•
最小顯示模式：僅顯示作業狀態指示符。
如果 DVD 攝錄放影機具有警告訊息，則會顯示警告
訊息。
100%
檢查剩餘電量和錄製容量
• 將 POWER 開關向下滑動關閉電源，然後按下顯
示 ( ) / iCHECK 按鈕。
• 一小會後，根據記憶體和品質，電池時間和大約
可錄製時間將顯示約 10 秒鍾。 如果未插入存儲
媒體，則其圖示會變暗。
• 顯示 ( ) / iCHECK 按鈕在選單和快捷選單模式下不起作用。
•
1 分鐘以後才能顯示光碟資訊，視光碟情況而定。
) / iCHECK 按鈕。
臺灣 _ 26