Starting Web Viewer; Connecting Web Viewer - Samsung XRN-2010 User Manual

starting web viewer

WHAT IS WEB VIEWER?
WebViewer is a software program with which the operator can access a remote NVR (Network Video Recorder) for
real-time monitoring, PTZ control (if configured) or search.
NETWORK
Network Camera
NETWORK VIDEO RECORDER
Product Features
• Remote connection using the browser
• PTZ camera control enabled
• 4:3 mode : supports 1, 4, 9, 16, 25, 36, 1+5, 1+7, 1+12, 1+9, 1+11, and 2+8 channels (up to 32 cameras)
• 16:9 mode : supports 2, 3, 6, 12, 20, and 30 channels (up to 32 cameras)
• Saving function in JPEG/BMP/PNG image format for printing and storage.
• Record video in AVI format-compatible with popular media players. (The integrated codec is needed)
• To play the video in Windows Media Player, you must download and install the relevant codec from www.
windows7codecs.com. (version 4.0.3 or higher)
System Requirements
The following lists the minimum suggested hardware and operating system requirements needed to run the
Web Viewer.
Item Minimum
CPU Intel Core 2 Quad 2.5GHz or higher
RAM 3GB or more
HDD 200GB or more
VGA Memory 512MB or more
Display Resolution 1280 x 1024 or higher
- Supported OS : Windows 7, 8.1, 10, Mac OS X 10.9, 10.10, 10.11
- Plug-in free web viewer
Supported web browsers : Google Chrome 47, MS Edge 20
OS
- Plug-in Webviewer
Supported web browsers : MS Explorer 11, Mozilla Firefox 43, Apple Safari 9 ※ Mac OS X
only
Network 10/100/1000 Ethernet NIC
NVR
USB
NETWORK
Remote PC
Recommended
Intel i7 (3.5GHz) or more
4GB or more
500GB or more
1GB or more

CONNECTING WEB VIEWER

1. Open your web browser and type the IP address or URL of NVR into the URL address box.
`
M Accesses the web viewer by connecting to Network 2 (recommended).
`
"192.168.2.200" is set to IP by default.
`
You must have specified the IP address in "Network > Interface".
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
For more information, refer to "Network Configuration > DDNS". (Page 45)
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
`
J The initial ID and password for webviewer is "admin" and "4321".
When an initial password is entered, while partially resetting to
access a web viewer, a pop up window will appear that will guide
the user to change the password and when doing a whole reset to
access a web viewer, a pop up window will appear that will guide
the user to complete the settings for the Install Wizard.
Set a new password when a pop up window appears.
`
Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a
password.
`
M
It allow s up to 10 simultaneous access including the Admin and general users.
`
Password of the Admin and general users can be changed in <User> menu of the NVR.
`
Normal users should have set <Webviewer> under <Restriction on Network Access> to Use before connecting to the
Web Viewer. (Page 27)
`
All settings are applied by the NVR's settings.
3. The plugin installation confirmation pop-up window will
appear.
4. When a program installation wizard window appears, press
the [Install] button to install the program.
`
The version of the program installed may vary depending on the
update version.
5. When program installation is complete, click on the [Finish]
button.
6. After completing installation and successfully logging in, the
main live viewer screen appears.
English _53