Samsung XRN-2010 User Manual page 28

menu setup
System Management
You can check the system version, update to a newer version, as well as data backup and initialization.
Checking the System Information
You can check the current software version and MAC address before proceeding with the upgrade.
• System Information : Shows the current system's information.
The values can not be changed by a user.
• S/W Upgrade : Updates the NVR's software up to date.
- Press the < > button to search for and display the equipment to upgrade.
• Device Name : Displayed if the network viewer is connected to NVR.
To upgrade the current software version
1. Connect a device storing the software to be updated.
`
It may take about 10 seconds to recognize the device.
`
Upgradeable devices include USB memory, and network device.
`
To update the network, the current NVR should have been connected to the network.
Upgrade via the proxy server may not be enabled due to the restricted access.
2. Select <System Management> from <System> window.
3. Select <System Information>.
28_ menu setup
4. When the recognized device appears, select <Upgrade>.
`
If you connect a device in the upgrade menu window, you can press the <
`
If there is an upgrade image on the network, the popup window will appear.
`
The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is same to or
older than that of <S/W Upgrade>.
5. Press <OK> in the "S/W Upgrade" window.
`
While updating, it shows the progress.
6. When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
`
M If "Upgrade Failed" appears, retry from the step 4.
When you experience continued failure, consult the service center for assistance.
Settings
You can copy and import the NVR settings by using a storage media.
• Storage Device : Shows the connected storage device.
- Press the < > button to view the list of storage devices.
• Export : Exports NVR settings to the connected storage device.
• Import : Imports NVR settings from the storage device and applies to the NVR.
- Uncheck the checkbox of an item(s) that you want to import.
Only the other items than the selected one will be applied to the NVR.
`
<Export> and <Import> settings should be used in the same software version.
> button to search for available software.