Replacing A Rotating Gobo - Martin MAC Axiom Hybrid User Manual

10. Place the prism in the holder first, then the washer, and then install the circlip on top of the
washer:
Circlip (on top)
11. Check that the head cover safety wires are correctly installed during reassembly. Check that the
fixture is secure before reapplying power.

Replacing a rotating gobo

Gobo removal
To remove a rotating gobo:
1. Stand the fixture on its base on a stable work surface.
2. Remove the head covers (see 'Access inside the head' on page 22).
3. Tilt the head so that you can access the rotating gobo wheel, and rotate the wheel by hand until
you have access to the gobo that you want to replace (arrowed):
Washer (under circlip)
MAC Axiom Hybrid User Manual
Prism (under washer)
27