Setting The Base Station; Protecting Against Unauthorised Access; Changing Ringer Tones; Activating/Deactivating - Siemens Gigaset C470 Manual

Setting the base station

Setting the base station
The base station settings are carried out
using a registered Gigaset C47H handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must be entered when, for
example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
Gigaset C475: Setting a system PIN facili-
tates remote operation of the answer
machine (page 38).
¢ ¢ ¢
v Ð
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For
security reasons, the PIN is
shown as four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
50
System PIN
.
§OK§
§OK§
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base has now been reset and the sys-
tem PIN 0000 set.
Please note:
All handsets are deregistered and must be re-
registered.

Changing ringer tones

u
Volume:
You can choose between five volumes
and the "crescendo" ring, see page 47.
Select "0" to deactivate the base station
ringer tone.
u
Ringer tones:
You can set a ringer tone melody for
external calls, see page 47.
¢ ¢
v Ð
For how to adjust the settings, see
page 47.

Activating/deactivating

.

music on hold

¢ ¢
v Ð
Press to activate or deactivate music
§OK§
‰
on hold ( = on).
¢
Base Ringer Settings
¢
Base Music on hold