You cannot deactivate the confirmation
tone for placing the handset in the base
You can also set the call volume, the ringer
tones and the advisory tones via the menu
(see page 15).
Setting the alarm clock
Precondition: The date and time have
already been set (page 10).
Activating/deactivating the alarm
clock and setting the wake-up time
Change multiple line input:
Enter the wake-up time in 4-digit for-
Set the volume (1–6).
Save changes: (page 59).
You will see the ì icon.
A wake-up call with selected ringer tone
(page 47) is signalled on the handset. The
wake-up call sounds for 60 seconds. ì is
shown in the display. If no key is pressed,
the wake-up call is repeated twice at five
minute intervals and then turned off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
wake-up call is deactivated.
Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
Restoring the handset to the
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list, call history, SMS lists or the handset's
registration to the base station.
Press the display key.
Press and hold (idle status).
Setting the handset