Charge Wi-Fi Hotspot - Telstra MF910V User Manual

press the Reset button until the LED's go out. A reset will restore all settings to
factory default.
Use the default Wi-Fi SSID and Password shown on the device sticker to log in via
Wi-Fi.
You can also connect directly to a computer using the USB lead provided, log into
the web interface and access the Wi-Fi SSID and Password from the Wi-Fi Settings
menu.
See Connect Devices via Wi-Fi (below) for more instructions.
CHARGE YOUR WI-FI HOTSPOT
Connect your charger as shown. Take care to check the orientation of the charger
lead and insert carefully into the charging port on the device.
• Only use the genuine charger and USB lead provided. Use of third party
adaptors can damage your device.
• Typical charging time is 3-4 hours using the standard charger. Charging from a
USB source (ie laptop) will take longer.
• During periods of high continuous activity with multiple users, high download
rates or low network signal, charging by USB will not have sufficient current to
charge the device. In this situation the battery will discharge so it is preferable
to use the mains charger.
• Always insert and remove the charging lead with care and take care not to trip
or pull on the lead harshly which could damage your device.
Page 4 of 31