Usb Configuration - Nexcom NDiS M535 User Manual

Chapter 4: BIOS Setup
SATA Configuration
This section is used to configure the SATA drives.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Boot Security
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
[Disabled]
SATA Test Mode
Serial ATA Port 2 Empty
Software Preserve Unknown
Port 2 [Enabled]
Hot Plug [Disabled]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
SATA Controller(s)
Enables or disables the SATA controller.
SATA Test Mode
Enables or disables SATA test mode.
Port 2
Enables or disables Serial ATA port 2.
Hot Plug
Enables or disables hot plugging feature on Serial ATA port 2.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Enables or disables SATA device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

USB Configuration

This section is used to configure the USB.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 1 Mouse
Legacy USB Support
XHCI Hand-off
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Legacy USB Support
Enabled Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are connected.
Disabled Keeps USB devices available only for EFI applications.
XHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off. The
XHCI ownership change should be claimed by the XHCI driver.
38
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
[Enabled]
[Disabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS M535 User Manual