Jeep Renegade 2015 Owner's Manual page 615

can be set at "Low," "Med" or "High." To change the
LaneSense Strength status, Press the "LaneSense Strength"
button and select from the "Low," "Medium" or "High"
buttons. Press the back arrow/Done button on the touch-
screen to return to the previous menu.
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Starting And Operating."
• ParkSense® — If Equipped
The ParkSense® system will scan for objects behind the vehicle
when the transmission shift lever/gear selector is in REVERSE
and the vehicle speed
(18 km/h). It will provide an alert (audible and/or visual) to
indicate the proximity to other objects. The system can be
enabled with Sound Only, or Sound and Display. To change
the ParkSense® status, press and release the "Off," "Sound
Only," or "Sound & Display" button. Press the back arrow/
Done button on the touchscreen to return to the previous
menu. Refer to "ParkSense®" in "Starting And Operating" for
system function and operating information.
is less than 11 mph
Refer to "ParkSense® Rear Park Assist" in "Starting And
Operating" for system function and operating information.
• Front ParkSense® Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC or Uconnect® System (if equipped). The
chime volume settings include "LOW," "MEDIUM," and
"HIGH." The factory default volume setting is MEDIUM.
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in Lights mode. When
this mode is selected, the Blind Spot Monitor (BSM)
system is activated and will only show a visual alert in
the outside mirrors. When Lights & Chime mode is
activated, the Blind Spot Monitor (BSM) will show a
visual alert in the outside mirrors as well as an audible
alert when the turn signal is on. When Off is selected, the
Blind Spot Monitor (BSM) system is deactivated. To
MULTIMEDIA 613
11