Jeep Renegade 2015 Owner's Manual page 274

272 SAFETY
System Reset Procedure
Depending on the nature of the event the left and right
turn signal lights, located in the instrument panel, may
both be blinking and will continue to blink until the
ignition switch is turned to the OFF position. After an
accident, turn the ignition switch to STOP/OFF position,
check that there aren't any losses of fuel/liquids. In order
to move your vehicle to the side of the road, you must
follow the system reset procedure.
Customer Action
1. Turn ignition OFF.
(Turn Signal Switch Must
be placed in Neutral
State).
2. Turn ignition ON.
Customer Will See
Left Turn Light is OFF.
Right Turn Light
BLINKS.
Customer Action
3. Turn Right Turn Signal
Switch ON.
4. Turn Left Turn Signal
Switch ON.
5. Turn Right Turn Signal
Switch ON.
6. Turn Left Turn Signal
Switch ON.
7. Turn Left Turn Signal
Switch OFF. (Turn Signal
Switch Must be placed in
Neutral State).
Customer Will See
Right Turn Light is ON
SOLID. Left Turn Light
BLINKS.
Left Turn Light is ON
SOLID. Right Turn Light
BLINKS.
Right Turn Light is ON
SOLID. Left Turn Light
BLINKS.
Left Turn Light is ON
SOLID. Right Turn Light
is ON SOLID.
Left Turn Light is OFF.
Right Turn Light is OFF.