Maintenance - Lanaform LA11050 User Instructions

Safety
• Make certain that the voltage matches the product specification.
• Do not remove the plug with wet hands.
• Do not let water enter inside this product to avoid electrical shock or causing damage to the product.
• Do not damage the cables or make any modifications to the electrical circuit of this product.
• Use a dry duster to clean this product as well as electrical parts such as the switch and the plug.
• Stay away from this product if it is electrically out of order to avoid any injury should the current return abruptly.
• Stop using this product if you feel ill and go consult a doctor.
• Do not use this product if the outlet is loose.
• Please use it in an intermittent manner. Do not operate this product for hours on end.
• If this product operates without stop for a long period, the thermal protection device will automatically shut it down.
The armchair can be used again after a rest of a half hour.
The appliances are not intended for startup by an external timer or a separate remote control system.
If the power cable is damaged, it must be replaced by the manufacturer, an approved repair agent or any qualified
person, to avoid any danger.

Maintenance

• This product should be maintained by an approved technician. Users are prohibited from disassembling the armchair
themselves.
• Please do not forget to disconnect it after use.
• If you are not going to use this product for a long period of time, fold away the cables and store in a dry place.
• Do not keep this product in an area exposed to high temperature or near an open flame and avoid long periods of
exposure to direct sunlight.
Solutions for simple cases of malfunction
• It is quite natural that the motor makes a bit of noise when the armchair is operating.
• If the controls do not work, check to see that the outlet and the plug are well connected and ensure that the switch
behind the armchair is lit.
• If the operational time has run out, the product switches off automatically.
Assembling the armchair:
You need to have 2 persons to assemble this armchair.
1) Remove the armchair and its accessories from the cartons.
2) Place the frame of the armchair on a flat surface
3) Place the large mobile protective cushion on the back and
secure using the zip (1). We recommend that you avoid moving
the cushion behind this mobile cushion to ensure optimal comfort.
Then place the small mobile protective cushion on the back
and secure using the Velcro strips (2).
Massage armchair
EN
5