Maintenance - Lanaform Bodyscan Massager Manual

06 Select the amount of time (10 or 15
minutes). When choosing the massage
area, the automatic stop is activated
and set to 15 minutes automatically. By
pressing the timer button, the automatic
stop can be set to 10 or 15 minutes.
Warning: once the timer settings have
been changed, the countdown starts
again from zero. To prevent the device
from overheating, select the maximum
massage time at the start and do not
change this during the massage.
07 If you want to stop the massage
before the end of the selected time
period, press the POWER button. The
massage heads will return to their
starting position. Do not disconnect
the device from the mains during
operation. Always wait a few moments
after turning off the device to allow
it to return to its starting position.
E-IM-BodyscanMassager-Lot001.indd 8 E-IM-BodyscanMassager-Lot001.indd 8
Cleaning

Maintenance

01 Disconnect the cushion from the
power source and wait a few min-
utes before cleaning it.
02 Clean it with a soft, slightly
damp sponge.
03 Never let water or any other liquid
come into contact with the cushion.
04 Do not immerse it in liquid to clean it.
05 Never use abrasive detergents,
brushes or thinners to clean it.
06 Wait until the device is com-
pletely dry before re-using.
Storage
When not using the device for long periods
of time, we recommend that you keep it in the
original packaging in a dry place and do not
put any items on top of it. You can also hang
the device in a wardrobe using a hanger. To
do this, the hanger must be inserted into the
hanger strap on the side of the device. Make
sure you use a stable wooden hanger that can
withstand the weight of the device. Avoid con-
tact with sharp edges and other pointed ob-
jects that could cut or pierce the fabric surface.
Do not hang the cushion up by the manual-con-
trol lead or the power cable.
30/08/2022 10:53:36 30/08/2022 10:53:36