Lanaform LA11050 User Instructions page 6

Install the armrests of the massage armchair
EN
One person raises the thigh support while the second slides the armrest on the side of the armchair, checking to see that
the metal bar slides correctly into the armchair frame. (1)
Attach the screw under the rear of the armrest. (2)
Connect the cables of the air cushion to each case and insert the cases in the extremities of the armrests which you close
with protective cover plates
Ensure that the cable behind the protection cushion is connected to the same terminal box as the air cushion.
Connect the headset and the jade heater to the rear of the armchair. (3)
Installation of the control panel and the mini tray
6
Controller stand
Screw
Support shelf
1. Remove the screw that is already installed on the controller stand.
2. Clip the ball that is located in the extremity of the support shelf in the cavity of the
controller stand