Vibration Function; Demo Function; Maintenance - Lanaform Shiatsu Massager Manual

from the outset and do not change
this setting during the massage.
08 Use the massage device for no more
than 15 minutes, then allow it to cool
down. You can stop the massage at
any time by pressing the ON/OFF
button. When the massage heads
are switched off, make sure they first
return to their initial position in the
lower back area. An LED indicator then
starts to flash. Once it has returned to
this position, the device switches off.
09 Do not unplug the device from the
mains while in operation. Always switch
off the device and wait a few moments
for it to go back to its starting position.

Vibration function

Select the vibration key [3] in succession for a
vibrating leg massage. This function with 3 lev-
els of intensity can be activated separately from
the shiatsu massage.
Heating setting
The Shiatsu Massager seat cover has a heating
function in the 4 massage heads. To activate
this function, first press on the massage area
you want [5/6/7], followed by the heat button [8].

Demo function

Press on the Demo key [4] to show the functions
of the Shiatsu Massager seat cover.
E-IM-ShiatsuMassager-Lot001.indd 7 E-IM-ShiatsuMassager-Lot001.indd 7

Maintenance

Unplug the cushion from the mains and wait a
few minutes before cleaning.
Clean it using a soft, slightly damp sponge.
Never let water or any other liquid come into
contact with the cushion.
Do not immerse in liquid to clean it.
Never use abrasive detergents, brushes or a
solvent to clean it.
Wait until the device is completely dry before
re-using.
Storage
Put the Shiatsu Massager in its box and store
in a dry place.
Avoid contact with sharp edges and other point-
ed objects, which might cut or pierce the fab-
ric surface.
To prevent the power cable breaking at any point,
do not wind it around the cushion.
Do not hang the cushion up by the manual con-
trol lead or power cable.
08/03/2021 10:05:16 08/03/2021 10:05:16