Storage; Environment - Webb WER18HP Operator's Manual And Parts List

Remove the transmission casing by removing the screws and clean around the transmission and drive
belts with a brush or compressed air once or twice a year.
Once every season, the drive wheels should be cleaned internally. Remove both wheels. Clean the gear
wheel and the wheel gear rim of grass and dirt using a brush or compressed air.
CHANGING BLADES
Empty the oil tank before removing the blade.
To replace the blade, undo the screw.
Reinstall as illustrated. Tighten the screw properly. Tightening torque 45 Nm.
When replacing the blade, the blade screw should also be replaced.

STORAGE

The same petrol must not remain in the tank for more than one month.
Thoroughly clean the mower and store it indoors in a dry place.
THE ENVIRONMENT
In order to protect the environment, we recommend that the following points should be given special
consideration:
Always use pure unleaded petrol.
Always use a funnel and/or petrol can with a level control to avoid spillage when refilling the fuel
tank.
Do not fill the fuel tank completely.
Do not overfill with engine oil.
When changing the oil, ensure that all the used oil is collected. Avoid spillage. Take the used oil to a
recycling unit.
Do not dispose of used oil in a rubbish bin. Take it to a recycling unit.
Replace the silencer if faulty. Always use the Manufacturer's original spare parts.
Always seek professional help when the carburretor requires adjustment.
Clean the air filter according to the instructions.
7