Removing And Replacing Batteries - Hoveround mpv5 Owner's Manual And Warranty

The cable that joins the joystick to the junction box is a
critical part of the vehicle. Ample cable is provided to allow
for adjustments. There is a danger if this cable is not correctly
routed. Do not allow the excess cable to extend beyond the
width of the chair where it may become damaged.
Figure 7F
Battery Removal/Replacement
(if equipped with separate removable batteries)
Removal
1. Remove each of the battery connectors by pinching the tab
on the connector at the junction box and gently pulling free
(See Figure 7G, Above).
2. Carefully lift the battery and case clear of the base.
Replacement
1. Either battery can fit onto either side of the base.
2. Place the battery into the vehicle deck recess which is located
on the base under the seat with the cable facing rearward.
3. Insert the connector into the appropriate receptacle of the junction
box. The left battery connects to the receptacle on the left side, right
battery connects to the receptacle on the right side.
4. Lock the battery connector plug to the receptacle by pushing until a
click is heard. Gently pull on the connector to ensure it is fully locked
in place.
46 Chapter 7
Figure 7G
D82008753R 10/15