Joystick Controller; Additional Features - Hoveround mpv5 Owner's Manual And Warranty

Hide thumbs Also See for mpv5:
Table of Contents

Advertisement

10. As your skill increases, you may want to increase the Speed/Response
Control. For each increase of the Speed/Response Control, be sure you
practice several stops until you get used to the new stopping distance.

Joystick Controller

All the controls and indicators necessary to drive your MPV5 are located
on the joystick controller. See Figures 1A - 1B to identify your controller.
1. ON/OFF - Press to turn the system on and off.
2. System Status Indicator – Steady illumination means all systems are
functioning properly. A flashing display indicates an error is present
or the controller is locked. Refer to Appendix B (pages 52 - 53) for
error codes and troubleshooting information.
3. Battery Gauge – Shows how much battery charge is remaining.
All lights lit means full charge. Recharge as often as possible.
4. Joystick – Controls speed and direction. The further you push,
the faster you go. To prevent an error code, do not push the
joystick at the same time you turn the power on.
5. Speed/Response Indicator – Indicates the currently selected speed
by the number of lighted segments. When all lights are lit, you are at
top speed.
6. Speed Up – Pressing the button increases speed.
7. Speed Down – Pressing the button decreases speed.
8. Horn Button – Press to make the horn sound.

Additional Features

Locking feature – Locks the controller. Refer to Appendix C (page 54 )
for operating instructions.
Sleep mode – Your chair will either power down or go off if left idle for 5
minutes. The system indicator may blink or the controller will completely
power off. Push the ON/OFF button twice to restart.
Fast braking – The controller has a fast-brake system. To stop quickly move
the joystick from the forward position to a full reverse position and release
the joystick. This will cause the power wheelchair to stop more quickly.
18
Chapter 1
If the joystick is not in the center position when the controller
is turned on, a fault condition is indicated. Return the
joystick to center. If the chair does not move, reset the
control by turning the power off and then on.
D82008753R 10/15

Advertisement

Table of Contents
loading

Table of Contents