Screen Setup - Olympus Stylus 500 Advanced Manual

Screen setup

You can register your favorite picture for display when the power is turned
on. Register a picture from the pictures saved on the card and use [PW ON
SETUP] to display it on the startup screen.
g"Power on setup" (P.94)
Mode dial
Top menu [MODE MENU]
• If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET] and press e. If you
select [KEEP], the screen returns to the menu.
1
Select the picture you want to register and press e.
2
Select [OK] and press e.
• The picture is registered and the screen
returns to the menu.
TIPS
• The recorded screen here is recorded at [2] of [PW ON SETUP] position.
Note
• You cannot register a picture or movie frame that cannot be played back on this
camera.
[SETUP] [SCREEN SETUP]
g"Menus" (P.15)
SCREEN SETUP
IMAGE EXISTING
RESET
KEEP
CANCEL SELECT GO
SCREEN SETUP
SET AS PW ON SCREEN
OK
CANCEL
CANCEL SELECT GO
OK
7
OK
95